| Search |
| |
Is anyone interested in machining?
I had no intent to reply, but, I guess everyone has to jump on board and put their 2 cents in.
re ... |
10-25-2002 at 04:20 AM
by: outlawsmithy |
Is anyone interested in machining?
Big Wig, why don't you just compare a Smithy to an all-out Bridgeport? A Smithy is a very accurate ... |
10-24-2002 at 05:38 PM
by: outlawsmithy |
Spike, you make your own parts, so....
THAT'S the truck I saw a while back! That's some nice workmanship there. He musta upgraded it, cuz ... |
10-24-2002 at 04:00 AM
by: outlawsmithy |
Is anyone interested in machining?
Smithy's are fine machines, but not from Enco and damn sure not from Harbor Freight! By the time yo ... |
10-24-2002 at 03:42 AM
by: outlawsmithy |
Remote glow extension
Try installing an onboard ignition sys. I have one in mine, and it works great!! No more connecting ... |
10-24-2002 at 03:13 AM
by: outlawsmithy |
Is anyone interested in machining?
Looks like the only people thatare interested in machining are Spoke & myself.
Anyone else intere ... |
10-23-2002 at 07:35 PM
by: outlawsmithy |
It Came Today
Just think how many OFNA would sell if there was a choice, radio or no radio? This is the only thin ... |
10-23-2002 at 06:43 AM
by: outlawsmithy |
I bought it
Jinx, does a pickup body fit on that cage or are you limited to a Blazer type body? Looks good! |
10-23-2002 at 12:38 AM
by: outlawsmithy |
want to get into making my own parts
biotech, for a CNC mill, this is about the lowest price you'll find. I don't know the quality but, ... |
10-22-2002 at 08:59 PM
by: outlawsmithy |
new t maxx
(message retracted, wrong forum)
[No offense people, I just like this little moon ... |
10-22-2002 at 06:40 PM
by: outlawsmithy |
Triple H 2 Speed
Do these 2 spd's have steel gears or plastic? Heck, the 2 spd from OFNA with what ever parts you ne ... |
10-22-2002 at 06:13 PM
by: outlawsmithy |
Triple H - Clutch Shoes.
Spike mentioned some material for making clutches, but, it seems that no one's interested in it. He ... |
10-22-2002 at 06:05 PM
by: outlawsmithy |
400cc Billet Alum Fuel Tank For Sale
Mine was runnin' fine as well, but, I didn't like the looks of it, so, I'm "re-styling" it a li ... |
10-20-2002 at 05:22 AM
by: outlawsmithy |
What type of machine do i want to get
bio, it depends on what you're going to use it for. If you're looking to machine automotive rotors ... |
10-20-2002 at 01:15 AM
by: outlawsmithy |
Triple H - Clutch Shoes.
Have these shoes even been tested or are they being released on a "maybe" basis? $30 may no ... |
10-19-2002 at 02:45 AM
by: outlawsmithy |
Need help(driving on ice)
Even better than that for driving on ice...are....carpet tacks or cut down roofing nails with the bi ... |
10-18-2002 at 10:53 PM
by: outlawsmithy |
want to get into making my own parts
Where do you start? You start with the desire to this kind of work/hobby. Second, I wouldn't start ... |
10-18-2002 at 04:06 AM
by: outlawsmithy |
Spike, you make your own parts, so....
I haven't been on this board long either. I might make a post in the main forum, maybe someone know ... |
10-17-2002 at 07:13 PM
by: outlawsmithy |
Spike, you make your own parts, so....
Ozzie, the CNC kit for the Granite is about $3200....and that's on top of the price of the Granite; ... |
10-17-2002 at 05:02 AM
by: outlawsmithy |
Titan in RCCA
Just make a cover out of clear lexan or whatever. shouldn't be too difficult to make |
10-17-2002 at 04:48 AM
by: outlawsmithy |
The new Titans are in!
It's too bad they come with a radio, tho, I think they'd sell more if you could get it without a r ... |
10-17-2002 at 04:44 AM
by: outlawsmithy |
Spike, you make your own parts, so....
Hey Spike, speaking of diff cases, someone already made some a few months back, if I remeber right. ... |
10-16-2002 at 08:35 PM
by: outlawsmithy |
should have left well enough alone
Try eHobbies.com for the piston. |
10-16-2002 at 06:06 AM
by: outlawsmithy |
Worn out balls !
Ya know, this guy asked a legitimate question about his balls and got a lot of smart remarks!  ... |
10-16-2002 at 04:42 AM
by: outlawsmithy |
Spike, you make your own parts, so....
Ozzie, I use a Smithy Granite.
Bend anything, Spike? Bite your tongue!!!
Thanks Steven! And I ... |
10-15-2002 at 04:08 AM
by: outlawsmithy |
| [Next Page] |
| |
