| Search |
| |
SORRY PEEPS. ITS ADIOUS FROM ME. IVE HAD ENOUGH.
I used to love making them parts , had a little production going with them .
Worst bit was the po ... |
7-5-2010 at 10:37 PM
by: Lightning Rc |
SORRY PEEPS. ITS ADIOUS FROM ME. IVE HAD ENOUGH.
Its got one of my wheelie bars on it , I used to make them and sell them .
Mr Midmads idea with t ... |
7-4-2010 at 06:43 PM
by: Lightning Rc |
Why does my engine have a mind of its own?
May be 2 lean at idle .
Make sure your fuel lines etc are ok.
Plus make sure head is tight , ... |
6-17-2010 at 08:48 PM
by: Lightning Rc |
SORRY PEEPS. ITS ADIOUS FROM ME. IVE HAD ENOUGH.
Lee if you really get fed up , put it all in a box when you finished and post it to me  |
6-17-2010 at 09:53 AM
by: Lightning Rc |
SORRY PEEPS. ITS ADIOUS FROM ME. IVE HAD ENOUGH.
They are awsome trucks !! but you must locktite every single screw , grub screw or nut every where . ... |
6-17-2010 at 09:52 AM
by: Lightning Rc |
Please can anyone sell me an MSJ STARTER?
Except for the engine and starter. |
6-6-2010 at 08:51 PM
by: Lightning Rc |
Just put my ek4 on ebay
Thats not good , demand a discount through paypal resolution service , had it with a guy with 4 4x4 ... |
6-6-2010 at 08:49 PM
by: Lightning Rc |
DD picture of the day!
That photo keeps haunting me lol  |
4-25-2010 at 09:31 PM
by: Lightning Rc |
By video Carburator set up for engine PRO-70BX of EK4 S2
make sure its set really rich like helicopter as its not a little .21 screamer |
4-25-2010 at 08:12 AM
by: Lightning Rc |
Fitting new Piston Ring
From the top just carefully spread it and move it down squarely and evenly and it will just pop into ... |
2-12-2010 at 10:15 PM
by: Lightning Rc |
Any EK4 parts
Contact Bigdumredneck on here hes a top man and think hes stil got parts. |
12-28-2009 at 05:08 PM
by: Lightning Rc |
Rc related video.
Very nice , where can I place my order too ?? handy to keep up the shed |
11-21-2009 at 02:19 PM
by: Lightning Rc |
Main difference?
Yes you would need to use your carb , crank and backplate starter plus fit your cyl. head. |
11-18-2009 at 10:13 PM
by: Lightning Rc |
One way clutch problem
They usually dont wear out , but stick , have you tried removing it and washing the bearing out with ... |
10-23-2009 at 08:30 PM
by: Lightning Rc |
Hi from a ek4 user
Nedia spend afew hours reading this site , its all on here , to much to tell u in a reply .
Steve ... |
9-7-2009 at 08:11 PM
by: Lightning Rc |
| [Next Page] |
| |
